Indirect Evaporative Cooling - INDEC INDIRECT EVAPORATIVE COOLING


Unit Details

The INDEC Indirect Evaporative Cooling unit can provide cool and fresh air even in the hottest of climates, with radically reduced energy costs.

The new generation INDEC uses a patented indirect polymer heat transfer core that delivers cool, 100% fresh outside air with very low energy consumption.

Incoming fresh air passes through the primary heat exchange core which has a series of wet and dry channels allowing natural evaporation to cool the air. Warm moist air is expelled, while cool air, without added moisture is delivered into the building. Through this indirect and direct evaporation process the outlet air temperature becomes lower than the web bulb temperature of the ambient air.
A secondary direct evaporative paid further reduces the outlet air temperature as low as 15 degrees C can be achieved even with an outside ambient temperature of 40 degrees C.

Where should Indirect Evaporative Cooling be installed?
Like all the units manufactured and supplied by the team at Armcor Air Solutions, the INDEC indirect evaporative cooling unit is more suited to some enviornments than others.
Indirect Evxpoartive Cooling can be used in most Australian conditions and typically the performance of INDEC unit excels in hot, dry ambient conditions ideally where the relative humidity is less than 50%.

Standard capacities form 300 L/sec to 8000 L/sec, to suit applicatiosn such as;

  • Commercial Venues, Sporting Complexes and Gymnasiums
  • Public Utility Buildings, Police, Ambulance and Nursing Homes
  • Education Facilities

Contact us today for all your cooling needs

Armcor Air Solutions are a leading manufacturer of indirect air cooling units, energy recovery systems and air-conditioning systems. Since 1978, we’ve been the preferred partner for organisations across Australia, delivering the dedicated follow up support and maintenance that businesses and institutions require in order to achieve their goals. We have a vast range of products to suit any building, climate or industry, so whatever you’re looking for, speak to one of our team members today and let us help you find the right system for your application.
For more information on our indirect air cooling units, take a look at our specifications table or download our above guides. If you would like to contact us directly, you can do so by filling out our online enquiry form or give our head office a call on 03 8301 9200. Our experienced team will be able to answer all of your questions.

Specifications & Downloads

MODEL NO
MODEL NO
MODEL NO FILTER PLENUM
MODEL NO FILTER PLENUM
Technical Specification PDF Drawing
INDEC1000P3
INDEC1000P3FP
INDEC1500P3
INDEC1500P3FP
INDEC2000P3
INDEC2000P3FP
INDEC3000P3
INDEC3000P3FP
INDEC4500P3
INDEC4500P3FP
INDEC6000P3
INDEC6000P3FP